Resource Library

showing 19 through 24 of 58 results. page 4 of 10 pages.
FAQ
Are Vapor Degreasing Solvents Flammable?

MicroCare recommends nonflammable solvents, or cleaning fluids, to minimize costs and maximize worker safety. In general, most of the the MicroCare, Tergo and Chemours Vertrel and Opteon products all are nonflammable. The full line of precision cleaning choices can be reviewed on this web site.In terms of the hardware, most vapor degreasing systems are engineered for the use of…

FAQ
Can We Add IPA to the Duraglide Fluid?

Do not add IPA alcohol to Duraglide to “top off” the tank of bath. If add IPA to the formula it will not be “in-spec.” There is no IPA in the carrier fluid formulation, so adding IPA to the Duraglide will by definition put it out of sec. It also would impact the quality of the…

FAQ
Is Co-Solvent Cleaning in a Vapor Degreaser a Good Option?

Most companies do not need the extra cleaning horsepower provided by co-solvent cleaning systems. However, for special applications it is a very smart and sophisticated option.In general, the MicroCare monosolvent fluids can perform all of the required cleaning jobs. The problem arises when you can’t get the cleaning horsepower you need from a monosolvent system. This can…

FAQ
Will MicroCare Solvents Work with Ultrasonics?

Yes, MicroCare cleaning fluids work very nicely with ultrasonics. Vapor pressure and surface tension are the two most important fluid properties governing the formation of cavitation in ultrasonic cleaning systems. Modern, planet-friendly solvents typically have low vapor pressure and low surface tension, so they cavitate nicely. Most commonly, ultrasonics are added to the rinse sump…

FAQ
What's the Difference Between an Aqueous Ultrasonic Cleaner and a Vapor Degreaser?

Most ultrasonic degreasers are single-tank systems containing a slow-drying nonflammable liquid, such as water, enhanced with a soap or saponifier. These machines are simple, inexpensive, and easy to use. But they do not deliver the highest quality cleaning because they have no way to rinse the contamination from the parts being cleaned.In contrast, vapor degreasing…

FAQ
Can I Use IPA in a Vapor Degreaser or Ultrasonic Cleaner?

The short answer almost always is, NO, don’t do this. It can be extremely dangerous. YouTube has a number of videos showing people cleaning parts in ultrasonic machines filled with IPA alcohol. Here at MicroCare we always are amazed at this. It is absolutely not an acceptable industrial process.Some people use IPA alcohol or “white…