Resource Library

showing 691 through 696 of 1239 results. page 116 of 207 pages.
FAQ
How does the Shield™ Level 3 surgical mask compare to a medical grade N95 respirator?

The Shield High-Efficiency Face Mask is the best level of protection available in a disposable pleated face mask short of N95 medical respirators.SHIELD HIGH-EFFICIENCY LEVEL 3 SURGICAL FACE MASKN95 MEDICAL RESPIRATORSingle use disposable.Single use disposable.Particle filtration at 98% or greater.Particle filtration at 95% or greater.High level of fluid resistance.High level of fluid resistance.Improved fit with…

FAQ
What is V-Cide?

It is a liquid chemical sterilant designed for use in chemical vapor sterilizers such as the Harvey®Chemiclave®. Although chemical vapor sterilizers and steam autoclaves are both used for heat sterilization of instruments, V-Cide is not indicated for use in steam autoclaves.

FAQ
I previously used Vapo-Steril®. Is V-Cide acceptable for use in chemical vapor sterilizers?

Yes. V-Cide is tested with FDA clearance to market as a sterilant solution effective for use in chemical vapor sterilizers and has reduced fumes and odor. V-Cide is used the same way as Vapo-Steril®. Do not dilute and do not re-use the solution. Follow the Chemiclave®manufacturer’s directions for filling the device with solution and draining…

FAQ
How do I start using V-Cide?

It is not necessary to drain all the previous solution. Add V-Cide Chemical Sterliant to the tank of the chemical vapor sterilizer as usual. There may be noticeable odor until the last traces of the previous product are used up. Drain the sterilizer of used solution as usual according to manufacturer’s directions. Dispose of used…

FAQ
Will V-Cide rust or corrode instruments or leave a residue?

No, V-Cide chemical sterilant will not leave rust, corrosion or residueon instruements. One of the benefits of chemical vapor sterilization is the low water content (under 15%) of the sterilant solution. Instruments are less likely to corrode and edges stay sharp longer.

FAQ
Why is it important to dry instruments prior to sterilization in chemical vapor sterilizers?

Residual water left on instruments may interfere with effective sterilization and could contribute to corrosion or spotting. Using a liquid chemical sterilant like V-Cide reduces risk of corrosion, rusting and dulling of instruments with sharp blades.