Resource Library

showing 1033 through 1038 of 1238 results. page 173 of 207 pages.
FAQ
How should Spec Clean˜ Ready-to-Use Disinfectant be used?

For surface disinfection as a“one-step” cleaner/disinfectant for surfaces that are not visibly soiled: Spray or squirt ProSpray onto surfaces or apply using paper towels or 4 X 4 gauze. Allow surfaces to stay wet for five minutes.For surface disinfection on surfaces with visible blood and soils: Use the 2 step method. Clean surfaces by spraying…

FAQ
Is it appropriate to use a stack of gauze pads pre-saturated with Spec Clean˜ Ready-to-Use Disinfectant solution?

This is not best practice. Gauze fibers may interact with disinfectant agents in the Spec Clean Ready-to-Use Disinfectant solution and reduce efficacy. Reaching into an open container may introduce contamination. Gauze at the bottom may not be used in a timely fashion and become degraded.

FAQ
Is Spec Clean˜ Ready-to-Use Disinfectant recommended for use to disinfect dental impressions and appliances?

Yes. Spec Clean Ready-to-Use Disinfectant is water based and meets most recommendations for disinfection of dental impression materials. It is bleach-free and will not corrode the metal portions of appliances. Rinse and remove gross debris from item. Place impression or appliance inside baggie, thoroughly wet all surfaces with Spec Clean Ready-to-Use…

FAQ
What are the chemical actives in Spec Clean˜ Ready-to-Use Disinfectant?

This product is a water-based dual synthetic phenolic compound with o-phenylphenol and o-benzyl-p-chlorophenol. Synthetic phenolics combine reliable disinfectant qualities with tested safety for low toxicity. Recent independent lab testing reaffirms the safe use of Spec Clean˜ Ready-to-Use Disinfectant with bare hands in the absence of biohazards.

FAQ
What is the benefit of non-alcohol actives in the Spec Clean˜ Ready-to-Use Disinfectant formula?

Spec Clean Ready-to-Use Disinfectant protects valuable equipment and reduces surface damage with the alcohol-free, ammonium-free and bleach-free actives recommended by device manufacturers.Disinfectants with alcohol tend to evaporate quickly making full contact time more difficult.Alcohol interferes with cleaning by causing blood and proteins to adhere more tightly.Long term use of disinfectants…

FAQ
What is the contact time for Spec Clean˜ Ready-to-Use Disinfectant?

Spec Clean Ready-to-Use Disinfectant is tested and approved for a one minute contact time to inactivate HIV-1, Herpes simplex virus type 1 & 2, Staphylococcus aureus and methicillin-resistant Staphylococcus aureus (MRSA), Salmonella enterica, Pseudomonas aeruginosa and fungi such as Trichophyton mentagrophytes. Spec Clean˜ Ready-to-Use…