Resource Library

Yes. V-Cide is tested with FDA clearance to market as a sterilant solution effective for use in chemical vapor sterilizers and has reduced fumes and odor. V-Cide is used the same way as Vapo-Steril®. Do not dilute and do not re-use the solution. Follow the Chemiclave®manufacturer’s directions for filling the device with solution and draining…

It is not necessary to drain all the previous solution. Add V-Cide Chemical Sterliant to the tank of the chemical vapor sterilizer as usual. There may be noticeable odor until the last traces of the previous product are used up. Drain the sterilizer of used solution as usual according to manufacturer’s directions. Dispose of used…

No, V-Cide chemical sterilant will not leave rust, corrosion or residueon instruements. One of the benefits of chemical vapor sterilization is the low water content (under 15%) of the sterilant solution. Instruments are less likely to corrode and edges stay sharp longer.

Residual water left on instruments may interfere with effective sterilization and could contribute to corrosion or spotting. Using a liquid chemical sterilant like V-Cide reduces risk of corrosion, rusting and dulling of instruments with sharp blades.

Yes, CDC Guidelines for Infection Control recommend that all items be packaged to maintain sterility. As with steam sterilization, make sure the packaging and total load are arranged to allow full penetration of the chemical vapor into each package or pouch. Due to the low moisture content of V-Cide Chemical Vapor Sterilant Solution, many types…

V-Cide is safe for use with materials recommended by manufacturers for sterilization in chemical vapor sterilizers and may be used for sterilization of most metallic instruments. Check manufacturer’s instructions for power hand pieces or plastic items before using the chemical vapor sterilant process.