Resource Library
Yes, Spec Clean™ Instrument Lubricant Concentrate may be diluted at a ratio of 2 to 3 oz. per gallon of water (60 to 90 ml. per 4 liters of water) with best results using distilled or deionized water. Lubricate after cleaning and before sterilization. Remove excess lubricant prior to packaging…
Spec Clean Instrument Lubricant Concentrateis a silicone-free and mineral oil-free instrument lubricant designed for use in the lubrication cycle of automated washer systems.
Yes, Spec Clean Instrument Lubricant Concentrate also contains anti-corrosive and rust inhibiting agents to protect valuable instruments.
Traditional opaque white “milking” lubricants are actually a suspension of mineral oil and other agents. Such products are typically labeled to “shake before use” because over time the ingredients will separate out into layers. In a larger container of 15 gallons this will produce uneven lubrication effects as the various layers are accessed by the…
Yes, both products are based on the same agents and ingredients. Both the Spec Clean™ Ready-to-Use Instrument Lubricant and Spec Clean Instrument Lubricant Concentrate feature a true solution with water soluble food grade lubricant actives, will not separate and do not require shaking before use…
Spec Clean Ready-to-Use Instrument Lubricant is designed specifically for manual and spot treatment. It is already diluted and ready for spray application while the Spec Clean Instrument Lubricant Concentrate is ideal for dipping appplications. Instruments should be thoroughly cleaned, rinsed and rough dried prior to application with lubricant spray. Lightly…