Resource Library

Do not use ACID Magic on vegetation, wood, marble, limestone, polished granite, nylon, carpets, man-made fibers, zinc, and galvanized metals. Reacts with carbon steel, aluminum and oxidized metals and use with any of these materials should be tested first. Failure to provide adequate ventilation can cause discoloration to metal or metal plated surfaces.

Always wear gloves and eye protection. It is not necessary to wear respiratory equipment unless you are particularly sensitive to acid fumes and/or are using the product in a poorly ventilated space. Always provide active ventilation. Users of ACID Magic should follow all local, state, and federal rules and regulations regarding this product, including SDS.…

Quart and gallon cases can be shipped non-hazardous. These are classified as Limited Quantity, Consumer Commodity. Larger sizes are shipped as Corrosive. ACID Magic is classified as Corrosive Liquid, n.o.s. (Hydrochloric Acid), UN1760, Class 8, PG III.

ACID Magic can be stored in almost any storeroom or warehouse. The greatly reduced fumes allow it to be stored without special covering or venting, as in the case of muriatic acid. Therefore, buildings, shelving and storage areas last longer. ACID Magic is still reactive with chlorine and other chemicals, and caution should be used…

ACID Magic has a boiling point of approximately 212°F (100°C) and a freezing point below -58°F (-50°C). ACID Magic is chemically stable and will return to its normal state if frozen.

In case ACID Magic is released or spilled, deny access to the area. Ventilate the area well. Large spills or leaks should be cleaned up and controlled with an inert absorbent material. Flush surface with water and neutralize with soda ash or other acid-neutralizing agent. Prevent material from entering waterways. Reportable quantity (RQ) is 5,000…