Resource Library

showing 7 through 12 of 145 results. page 2 of 25 pages.
FAQ
What Is the Meaning of a Fluid Toxicity Rating, Like a PEL or TLV?

In general, the “toxicity” of a cleaning fluid is measured through the use of 8-hour “time-weighted average exposure limits” (AEL). Similar terms you might find on labels and SDS sheets include “Average Exposure Limits” (AEL), “Personal Exposure Limits” (PEL) and “Threshold Exposure Limits” (TEL). One special term is “Threshold Limit Values” (TLVs) which only are…

FAQ
Can I Use nPB in My Cleaning System?

nPB is a strong, affordable, versatile, nonflammable industrial solvent. nPB is a great degreaser and defluxer. However, npB does have toxicity worries. nPB is banned in Europe as of July 2020 and other countries currently have nPB under scrutiny. In the 1990s when nPb was first introduced, the toxicity level for nPB (also known as “TLV”, “AEL” or “PEL”) was…

FAQ
Which Precision Cleaning Fluid Is the Mildest?

Very gentle, mild cleaning often is required when (a) cleaning substrates made from delicate materials, or (b) when the contamination is light, or (c) when the principle contamination being removed is water. Milder solvents generally are noted as having a low Kb value, typically 20-40 or so (a high Kb value is 100+). Many mild solvents…

FAQ
Is Global Warming a Problem With Any MicroCare Products?

The short answer is, maybe. Many of the cleaners used to replace alcohols, old- style chlorinated solvents, plus HCFCs and CFCs, all have Global Warming Potential (GWP) ratings of some degree or another. Careful engineers will need to determine which solvent works best in their application while minimizing the GWP. Most MicroCare product specifications list…

FAQ
How Do I Clean Fiber Optic Components on PCB Circuit Cards?

Using a fiber smaller than human hair, digital fiber optic networks have transformed our world. Today’s highly mobile world, with email anywhere, video on-demand and endless streaming video all is a direct result of powerful, reliable fiber optic networks. But amazingly, the signal carried by the fiber is astoundingly fragile. So cleaning connectors and end-faces…

FAQ
What's the Best Way to Clean PCBs at the Benchtop?

Almost everybody uses the dip-and-brush method to clean circuit boards during rework and repair. But this process doesn’t work very well.Other companies suggest you should use high-pressure aerosols and blast the contamination off the board. Which will work fine, if you don’t mind buying lots of aerosol cans.At MicroCare, we think the best way to clean PCBs…