How should Spec Clean™ Concentrated Disinfectant be used?

First, prepare Spec Clean Concentrated Disinfectant by diluting according to package directions. Next, for surface disinfection as a “one-step” cleaner/disinfectant for surfaces that are not visibly soiled: Spray or squirt prepared ProSpray C-60 onto surfaces or apply using paper towels or 4 X 4 gauze. Allow surfaces to stay wet for five minutes.

For surface disinfection on surfaces with visible blood and soils: Use the 2 step method: Clean surfaces by spraying or squirting prepared Spec Clean Concentrated Disinfectant onto surfaces or paper towels or 4 X 4 gauze. Wipe to remove soils. Discard used wipe material. Reapply Spec Clean Concentrated Disinfectant to surfaces and keep wet for a total of five minutes.

For instrument holding and cleaning solution: Check instrument manufacturer’s instructions. Fill pan or ultrasonic tank with sufficient Spec Clean Concentrated Disinfectant to cover instruments. Soak for 5 minutes. Avoid prolonged soaking over one hour.