Resource Library

Cleaning flux residue after soldering (fluxes or solder pastes) from different manufacturers can be very tricky, but the Critical Cleaning Lab at MicroCare solves this complex problem. This situation arose when printed circuit boards were produced using a combination of different fluxes and solder pastes. This can be a real challenge because the different fluxes might react to…

Most metal fabricators and machine shops have two parts cleaning options. Aqueous water-based cleaning or solvent-based cleaning inside a vapor degreaser. Both methods provide quality cleaning results. However, each has its drawbacks and advantages. This video delves into the pros and cons of each method and gives parameters on how to make the best choice.

“Stacked tolerances” is a term that describes a production problem in the engineering of medical devices when the cumulative effects of allowable variation aggregate towards a single vector or dimension. Normally, variances are expected to “average out” towards a design ideal. However, it is common — especially with injection-molded parts — to see tolerances gradually…

ProSpray is the ready-to-use surface disinfectant and cleaner that is effective against COVID-19, and approved by the EPA.

Learn how to critically read disinfectant labels for correct use which is essential to infection prevention in healthcare settings.

Disinfect your frequently touched surfaces with ProSpray, the sanitizing, hospital-grade surface disinfectant.