PTFE Spray Duraglide

Product Information

PTFE Spray Duraglide is a handy way to reduce friction

Applications:

• Mold release
• Component assembly
• Resolves “stiction” problems common in low-speed, light-load applications

Features:

• Ready-to-use-spray can
• Calibrated with a concentration of PTFE optimized for most lubrication needs
• Dries in seconds and can appears on the part as a milky-white film
• Imparts a low coefficient of friction of 0.06
• ISO 10993 tested and certified
• Factory calibrated PTFE content for consistent results
• Non-­flammable handling in storage and use
• No special equipment requirements
• Inimical to bio burden issues
• Compatible with ETO and radiation sterilization processes
• Oil free; non-migrating/non-staining
• Excellent materials compatibility; plastic safe
• Fast drying with minimal odor

The aerosol PTFE spray Duraglide is a medical-grade polytetrafluoroethylene microdispersion PTFE lubricant.  Spray onto the surface to coat. Once it dries, which is almost instantly, it leaves a thin, uniform, dry, PTFE coating over any surface. This enables a low-cost, non-migrating, pyrogenically-inert coating. 

Instructions:

• Note: Wear safety glasses when using this product as a precaution
• Treated surfaces should be clean and dry before application of the lubricant
• To ensure the lubricant dispenses uniformly, shake the can
• Make certain the “mixer ball” inside the can moves freely before each use
• Hold the can 10-12 inches (25-30 cm) from the surface
• For best results, apply as a thin mist - a single treatment is adequate for most applications