Universal Contact Cleaner - Europe
Product Information
This Universal Electrical Circuit Cleaner keeps electrical devices in top shape
Applications:
- Restores electrical continuity
- Rinses and flushes contamination away
- Unlike flux removers, it does not dissolve the contaminants
- Rinses grit from hot motors, dust from inside electromechanical relays, keyboards and other electrical devices
- Cleans dust, grit and dirt as well as mineral oils, silicone oils, hydrocarbon based oils and fluorinated oils/grease
- Use on connectors, switches, cable harnesses, tuners, power supplies, encoders, distribution panels, junction boxes, coax cables, and windings
Features:
- Produced, labeled and packaged for compliance with all UK and EU safety rules
- No residue / no rinsing
- Mild cleaner is non-corrosive and safe on most plastics, rubber and elastomers
- Kb Value: 34 (est.)
- Fast drying for speedy cleaning
- Chemical Family: HFO
- Nonflammable for maximum safety
- VOC Content (g/L): 59, VOC exempt
- RoHS/WEEE/REACH/EPA SNAP compliant
Universal Contact Cleaner is a sustainable HFO-based cleaner. Both the fluid and the propellant are based on HFO (hydrofluoroolefin) chemistry, so it is also ozone-safe and has an ultra-low GWP (Global Warming Potential) for minimal environmental impact. The aerosol cans are both TriggerGrip™ Cleaning Tool compatible and StatZAP™ ESD Eliminator Tool compatible.
Product Details
Product Image |
Part Number | Package | Weight | Size | Technical Data Sheet | Safety Data Sheet |
---|---|---|---|---|---|---|
![]() |
CCH107 MCC-CCH107 | Aerosol | 300 g 0.66 lb. | 242 ml 10.5 oz. |
Part Number | MCC-CCH107 |
---|---|
Package | Aerosol |
Weight | 300 g 0.66 lb. |
Size | 242 ml 10.5 oz. |
Technical Data Sheet | |
Safety Data Sheet |
Scroll
Appearance | Clear, colourless liquid |
---|---|
Odor | Slight |
Boiling Point | 19°C / 66°F @101.3 kPa |
Chemical Family | HFO |
Evaporation Rate | Fast |
Cleaning Strength (Kb) | 34 |
Flashpoint | N/A |
Global Warming Rating (100yr) | 1 |
VOC Organic Content (g/L) | 59 |
REACH & ELINCS Compliant | |
RoHS & WEEE Compliant | |
Safety Rating | Non-flammable |
- The MicroCare Reliable Care Way
- Azeotropes Explained
- Our Chemistries and Expertise Set Us Apart - APEX 2020 Interview
- Solder Paste and Flux Cleaning Results Revealed
- Cost-Cutter: Seven Ways to Save Money Cleaning PCBs
- How-to Connect and Disconnect the TriggerGrip Cleaning Tool
- How-to: Using the TriggerGrip PCB Cleaning Tool
- Best Practices: Cleaning During PCB Rework and Repair
- MicroCare Partners in RENEX Hand Soldering Championship 2019
- Mike’s Radio Repair Demonstrates the TriggerGrip™ Cleaning System
- Jumbo Sized Flux Removers Save Money
- Portable Flux Remover Pens are a Convenient Time Saver
- Static Dissipative Wipes Clean Without Worry
- Cost Saving Products for Benchtop Cleaning
- Case Study #15 — Cleaning Mixed Flux Residues from PCBs
- Going Green with Vapor Degreasing
- MicroCare Leads the Way on Worker Safety and Regulatory Compliance
- MicroCare Lab Services for Critical Cleaning
- MicroCare Critical Cleaning Experts
- MicroCare Offers IPA Alternative Cleaners
- 4 Types of PCB Contamination and How to Remove Them
- TriggerGrip InfoGraphic
- An Early PCB Cleaning Plan Leads to Manufacturing Success
- Cleaning and Drying Before Conformal Coating: Why It’s Important
- Modern Electronics Require Updated Cleaning Methods
- Modern PCBA Cleaning: Methods to Improve Reliability
- Removing PCB Conformal Coatings
- Ensure Contact Cleaner Compatibility with Today’s Complex Electronics
- Use Toxicity Ratings to Help Ensure Worker Safety
- The Meaning of Kb Value in PCB Cleaning
- Why Clean a No Clean Flux
- Flux Remover Selection Guide
- The Importance of Drying in PCB Cleaning
- All Electronics Cleaning Wipes Are Not Created Equal
- Safer Cleaning Choices Replace nPB in Aerosols for Worker Safety
- Circuit Board Design & Cleaning Evolves to Support Down-Hole Logging Technologies
- Stencil Wiping Fabric Improves Stencil Printer Through-Put